mv XINYIHAI 55
Type: MPC - 30.000
Built: 2012
Builder: Zhejiang Ouhua Shipyard China
Flag: Liberia
IMO No.: 9594509
Call sign: D5BY2
CLASS: NK
PORT OF REGISTRY: Monrovia.
1. Main particulars:
----------------
1.1. Hull
LoA 179,50 m/LPP 169,00 m/Beam 28,00 m/Depth 15,10 m
Draft summer, freeboard: 10,80 m
Draft design: 10,00 m
Ballast Capacity: 12.950 cbm
Heavy Fuel Oil: 2.048 cbm
GO Capacity: 125 cbm
FW Capacity: 170 cbm
Tonnage:
International: 22.863 GT / 10.602 NT
Suez: 23.356,82 GT / 21.969,70 NT
Panama 19.050,00 NT
Cargo Volume: 39.421 cbm (without Tween Decks) / 36.901 cbm (with Tween Decks)
Deadweight on des: 29.618 mts (without Tween Decks)
Deadweight on des? 28.788 mts (with Tween Decks)
Deadweight on FB? 33.217 mts (without Tween Decks)
Deadweight on FB: 32.387 mts (with Tween Decks)
Light ship weight: 10.150 mts (without Tween Decks)
Light ship weight: 10.950 mts (with Tween Decks)
Container capacity (20’/40’):
on Deck: 484 teu or 218 feu
in Holda: 674 teu or 327 feu
Total 1.158 teu or 545 feu
Vessel’s container intake is always subject to vessel's stability / trim / deadweight / permissible stack weights / lashing forces and subject to regulations of visibility.
Vessel not fitted with any container lashing equipment .
Complement: 30 Persons + Suez crew
Dangerous Goods :
acc. GL - DG cert as per vessel's certificates
acc. GL - DBC cert as per vessel's certificates
2 Machinery:
-----------------
Main Engine:
Licencor MAN B&W, Copenhagen
Licensee:
Maker: STX, Korea
Type: 1 x 6S50 MC-C7
Output: MCR 8.800 KW
Diesel generators:
Maker: Wartsila
Type: 2 x W4L20
Output: 1 x 520 kWel at 1.000 rpm 50 hz
Type: 1 x W4L20
Output: 1 x 670 kWel at 1.000 rpm 50 hz
Cranes:
Maker: MacGregor-Hägglunds
Number + Type: 4 electro hydraulic single deck crane
SWL: 60 mto
outreach: SWL 60mts - 20 mtrs / SWL 50mts - 24 mtrs / SWL 40mts - 30 mtrs
combinable: above hatch 2/3/4 to 110 mts by means of a traverse beam
location: centre, with off set to port side
Moorings:
2 x combined anchor / mooring winch
4 x auto mooring winch
Ventilation: hold 1,2,3,4,5 6 x fold mechanically, redundant
Rudder semibalanced, profiled
Propeller f.p., 4-bladed, diameter 6.0 m, high scew
3. Cargo / Hatches :
----------------
3.1. Cargo Holds
Hold. Cubic w/o TWD cubic with TWD in lower position: hatchsize (L X B) :
1. 3.260 3.260
2. 10.654 9.814
3. 10.654 9.814
4. 10.654 9.814
5. 4.199 4.199
------------------------------
total 39.421 36.901 (Tweendeck in holds 2/3/4)
Hold. Tank Top sizes: Bottom Sizes (L x B):
hold 1: 227 sqm 7.
hold 2: 742 sqm 30.4 m x 24.4 m
hold 3: 742 sqm 30.4 m x 24.4 m
hold 4: 742 sqm 30.4 m x 24.4 m
197 sqm + 135 sqm
hold 5: (monkey rocks) 13.6 m x 14.5 m (24.4 m)
------------------------
Total: 2,650 sqm + 135 sqm (MR) = 2,785 sqm tank top area total
Clear height in Hold: 14.86 mtrs
Tanktop strength: 20 mts/sqm except on monkey rocks in hold 5 where it is 12 mts/sqm and 4 mts/sqm on
racks when they are stored in hold 5
IMO Cargoes: in accordance with vessels certificates
Co2 fitted in hold 1,2,3,4,5
Sprinkler system in hold 1
Container stack weights:
150 mts per 20 ft stack
150 mts per 40 ft stack
3.2 Hatch covers
hydraulic folding type hatchcovers
covers always 1 panel folding upright forward and aft Hatch Cover Sizes (L x B):
hold 1.: 206 sqm
hold 2-4.: 2,067 sqm
hold 5.: 352 sqm
Total: 2,625 sqm
fixed container fittings flush type
container stack weights: 60 mts per 20’ stack on hatches 2-5 / 28 mts on hatch 1
90 mts per 40’ stack on hatches 2-5 / 56 mts on hatch 1
70 mts per 20’ stack on deck in front of wheelhouse
Hatchcover strength: 4 mts/sqm
3.3 Deck's Area between hatch covers hold 2-5 (even level)
area strength 4 mts/sqm 230 sqm
3.4 Deck's Area in front of deckhouse
area strength 4 mts/sqm 160 sqm
total deck's area even level 2,649 sqm
add. deck's area hold 1 206 sqm
add. deck's area front of DH 160 sqm
Total deck's area: 3,015 sqm
3.5 Tweendeck
Tweendeck in holds 2/3/4
Tweendeck strength: 4 mts/sqm
Tweendeck height: 2 times, 2 layers or 3 layers of 8'6'' containers beneath or above
Tween deck Principle: TD panels outside and aft resting on titable foundations at side wall
TD panels inside (at cl) resting on movable supporting racks
One, two, three or all five TD panels continuously laid out from aft to fwd.
a. m. TD panels laid out one or both sides
TD supporting racks to be free of horizontal lashing and cargo forces
Holds equipped with lashing eyes to assist in withdrawing cargo from racks
Tweendeck panels: Panel Weight 220 mts (each hold 2-4)
Tween Deck Racks in 2 x 8.5' tiers height: Rack Weight 30 mts (each hold 2-4)
or altern. Tween Deck Racks in 3 x 8.5' tiers height : Rack Weight 45 mts (each hold 2-4)
stowage position when not needed:
racks in hold 5 lower part
Panels in front of deck house (superstructure)
or alternatively:
in adjacent cargo holds (2-4) on Double bottom
Note: when racks stored in hold 5 no bulk cargo to be loaded in this hold.
fixed container fittings flush type
container stack weights: 48 mts per 20ft stack on TD panels 2-4
3.6 Timber fitted: YES
(stanchion pockets and lashing points, no slings/stanchions or lashing materials)
3.7 Jump Loads: hold 3+5 or 1+3 or 2+4 or 1+3+5 can be empty while remaining ones are loaded
3.8 Project Load on Hatches :?Socket Plates for 50 t/sqm can be laid out on hatch covers in way of
cargo holds nos. 2-5 for placing heavy project load
4. Classification GL +100 A5 Multi Purpose Dry Cargo Ship, Equipped for Carriage of Containers Solas II-2, Reg.19,
Strengthened for Heavy Cargo, G, ESP, IW, NAV-O, Environmental Passport, BMW, DG, DBC, + MC AUT
5. Other?
Australia, Suez, Panama fitted
?essel not fitted for grabs
Vessel suitable for grab discharge
Vessel t-beam fitted
Vessel does not have on board any slings or lashing materials
Vessel not to force ice nor to follow icebreakers